Three ground level microphone mounting techniques (flush mounting, inverting the microphone over a plate, and lying the microphone on a plate) were compared over a frequency range from 315 Hz to 20 kHz and over a wide range of incidence angles in the Langley Jet-Noise Laboratory anechoic room. The flush mounted microphone, when compared with a free field microphone, exhibited approximate pressure doubling up to a frequency of 10 kHz. At frequencies less than 4 kHz, the inverted and lying microphones were in good agreement with the flush mounted microphone, and their 1/3-octave-band response spectra were fairly insensitive to the position of the microphone. At higher frequencies, the geometry of the microphone and its mounting became important. The inverted microphone 0.5 times the diameter above the plate gave the flattest response compared with the flush mounted microphone. Nondimensional analysis of the inverted and lying results showed that for Kappa H cos theta 0.7 the response of the microphones approached that of the flush mounted microphone.

plus-circle Add Review

comment

Reviews